The following tip trimming instructions are suggestions only, as we generally do not recommend tip trimming on any driver or 3 wood shafts based on the composition of our shafts and how that could affect performance. We recommend that you consult your custom fitter or club-builder for the best tip trimming suggestions based on your individual swing and desired results. To locate a Fujikura custom fitter near you, please use our Dealer Locator.
In general, tip trimming can be used to achieve a stiffer shaft profile, lower launch, and/or lower spin. Tip trimming 1 “is equivalent to one flex, so for example, if you wanted to stiffen your S flex to an X flex then you would tiptrim 1”. Or maybe you decide that you want to play in between S and X flex, so it is suggested to tip trim 1/2”.
Below is our suggested tip trimming instructions for all of our Wood, Hybrid and Iron shafts.
|All Wood Shafts||0″||0″||0.5″||1.0″||1.5″|
|Hybrids||15-17 degree||18-20 degree||21-23 degree||24-27 degree||28 degree|
|PRO and Vista PRO||1/2″ increments starting with #3 and butt trim to length|
|MCI||butt trim to length|